G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cybergeak Posted on Saturday, July 21, 2007 - 03:40 pm:        I discovered recently my brake light doesn't come on for either the front or the rear brake control. The running light comes on no problem. i pulled off the rear light cover, only to discover both filaments (appearing) still intact. I'm off to get a multimeter to help trouble shoot this and a horn issue i'm having. Any ideas? i can't imagine both brake switches failing at or near the same time. and it doesn't look like this could be fuse issue. thanks Alex   Bluzm2 Posted on Sunday, July 22, 2007 - 11:11 am:        Does your horn work and blinkers work? You may have blown a fuse. I had my rear brake light pressure switch go bad, just replaced it with a unit from NAPA and bleed the brakes. Brad   Bad_karma Posted on Sunday, July 29, 2007 - 02:43 pm:        Alex The front brake goes serial through the rear brake. So look from the rear brake back to the tail light. It will either be a bulb or probably the spring loaded contact for the bulb. Of course don't over look the fuse. Joe (Message edited by bad_karma on July 29, 2007)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: