G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Joesbuell Posted on Saturday, June 16, 2007 - 08:29 am:        I have been thinking of fitting an XB dash to my 98 model tuber. It had a cable operated speedo, but because I've got an XB front end theres no way to drive a speedo! Does anyone know if an after market speedo sensor, that runs off of a front or rear wheel be used with the XB dash? I see you can buy a re-calibration unit so is it possible? I hope theres an electronics wiz out there! Or someone who can understand this!!!! Cheers Jodie   Bad_karma Posted on Sunday, June 17, 2007 - 12:18 am:        Jodie I'm not sure where I saw it, maybe J&P but they have a sensor to count the bolt heads on the rear pulley that will drive the digital speedos. If I run across it I will add it here. Good to see that the project is still active. Joe (Message edited by bad_karma on June 17, 2007)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: