G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ahhyeah1212 Posted on Thursday, June 14, 2007 - 02:42 pm:        Hey guys, I just finished hacksawing my cheese grater and wanted to know what tool I can use to trim off the edges? I have a Dremel but which bits will work best? Thanks   Captainxb Posted on Wednesday, June 20, 2007 - 11:09 am:        The Dremel might be a bit small for that much metal. I used a 4" angle grinder for mine, then finished off with a hand file. Can you hacksaw any closer?   Ahhyeah1212 Posted on Wednesday, June 20, 2007 - 04:04 pm:        thanks for the response but i ended up using the dremel to cut the rest. It was tough...i used up 2 metal cutting wheels and around 5-6 all purpose cutting wheels till i got it down far enough.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: