| Author | Message | ||
     Gnmike87 |
After chopping the tail on my 03 xb9s I rewired the blinkers and at first kept popping a fuse. After checking my wiring I got it to stop blowing the fuse. It worked fine for a few seconds. Now nothing happens at all. All the fuses are good and the wiring is correct. Where should I go from here? Could the switch have burnt out? Could the blinker relay be bad? Any ideas would help. Thanks Mike Merrill | ||
| Lost_in_ohio |
Works fine????? Have you checked the brake lights and license plate lights too???? I would start by checking the lamps.. Do you have access to a volt meter????? |
