Author |
Message |
Cookie83
| Posted on Saturday, March 10, 2007 - 06:59 pm: |
|
Hi i have just bought my first Buell It ran great for a couple of ride outs then started loosing power until now it will not start. I have checked the usual things plugs etc I have the injectors out of the manifold but still connected to fuel and power and when i hit the starter, 1st time good spay pattern 2nd time dry no fuel 3rd time one spurt then dry 4th good spray 5th good 6th dry any ideas what to check now? |
Cookie83
| Posted on Monday, March 12, 2007 - 02:43 am: |
|
Is there any body there? |
Justin_case
| Posted on Monday, March 12, 2007 - 09:22 am: |
|
"1st time good spray pattern " It should start if you have spark. Change the plugs. |
Cookie83
| Posted on Monday, March 12, 2007 - 09:57 am: |
|
It probably will start but only 3 times out of 6 and when it does run it runs terrible not much fun. I need to know why the injectors work sometimes and sometimes not? |
Justin_case
| Posted on Monday, March 12, 2007 - 12:30 pm: |
|
The ECM is trying to prevent flooding. Change the plugs. |
Cookie83
| Posted on Tuesday, March 13, 2007 - 06:15 pm: |
|
That makes sence thank you Is it possible that my bike will only run on the Buell race plugs because the first thing i did was change the plugs but for champion standard HD plugs? |
|