| Author | Message | ||
     Winchcable |
Do the Traction grips have the throttle tube molded into the grip like the Torque ones do? Thanks. | ||
| Khollister |
Yes | ||
| Winchcable |
Thank you. | ||
| Thespive |
Anyone have raction grips on a CityX? Can you pop off the end caps to make them work. --Sean | ||
| Diablobrian |
You will have to cut the center circle out of the grip and trim it a bit larger to keep it from dragging on the bar-end. There are 3 methods that I have heard of. 1) (I've done this) use a hot knife to cut the center out. X-acto makes hot knives that you can get at most hobby shops. 2) (done this too) use a dremel to grind away the last bits for clearance. 3) Freeze the grip and saw it with a pumpkin carving saw. I've never done this, but I've heard it works very well. | ||
| Thespive |
Thanks Brian. --Sean | ||
| Easy_rider |
Do the Traction grips have the throttle tube molded into the grip like the Torque ones do? Thanks. "Molded" might mean something a little different to me. They are still two pieces that can be separated. Always meant to go back and clean up the glue...  |
