G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Soslo2 Posted on Friday, July 07, 2006 - 03:59 pm:        Can anyone tell me the best way to clean an aftermarket breather filter? Is there anything special I need to do before re-installing it? I know it sounds like a ignorant question but i want to make sure i'm doing right. Thanks   Blake Posted on Friday, July 07, 2006 - 05:28 pm:        Is it reusable? If so it is likely the K&N type and can be cleaned in soapy water, blown dry, then re-oiled.   Pammy Posted on Monday, July 10, 2006 - 09:36 am:        Actually, 409 as the presoak(degreaser) Some warm soapy water, swish til clean. Bucket of clean(non soapy) water swish til no longer soapy(replace water as many times as needed). Let air/sun dry. Re-oil with fabric or foam filter oil as your situation dictates. Blowing frays the fibers. This is, of course, a guideline to keep the filter in tip top shape for the longest period of time. Blakes way will work too.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: