G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Italialaw Posted on Tuesday, March 28, 2006 - 08:45 pm:        Will mikuni part no. khs-020 work for a 98 s3? See link: http://cgi.ebay.com/ebaymotors/Mikuni-Head-Breather-Kit-Harley-Davidson-Evo-93-9 9_W0QQcmdZViewItemQQcategoryZ35572QQitemZ4625710148QQrdZ1QQsspagenameZWDVW thanks!   Bluzm2 Posted on Tuesday, March 28, 2006 - 09:56 pm:        Yes they will. Do you plan to reroute the breathers to a catch can? Brad   Al_lighton Posted on Wednesday, March 29, 2006 - 12:47 am:        Brad, Are you sure? The reason I ask is that if the nipples swivel as the bolt goes in, it may not be possible to thread them in with the engine in the frame. I seem to recall cutting one of my (non-mikuni) right angle nipples off as the easiest way of unscrewing them when I replaced them with banjo bolts. If the nipples don't swivel as the bolt is threaded in, or you know that they are short enough, never mind. Al   Italialaw Posted on Wednesday, March 29, 2006 - 11:36 am:        The Mikuni tech stated the KHS-020 bolts are 10mm. They're the "old" style that swivels. 10mm should fit? If I'm able to get a good seal I'll use them b/c I the bolts' look. Brad and Al, My set-up will be the mikuni bolts, 5/16" hoses from the bolts routed to a tee, then a 3/8" hose from the tee around the battery and ending near the end of kickstand when it's elevated. The junk will mist into the air.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: