| Author | Message | ||
     Joplin |
I posted this in the electronic section Hey all, I gotta run this buy you all. I have a 95 S2 that is running like crap, if you can even call it running. Story goes like this, I had it in the shop (never again) to press in a fifth gear bearing. Long, tortured story of idiot work, and I nhad done all the disassembly so all they were doing was the bearing and secondary drive sprocket, but when they delivered it back to me, the bike was on its side in the trailer. Like I said, idiots. Anyhow, every since then, it has a vicious backfire sometimes even when i crack the throttle. I've ckecked the VOES and the carb gaskets/seals, and exhaust studs. Is there any way I jacked up the timing when I removed the tranny? Thanks for any input , jm and I thought I'd post here as well. My backfire seems to be most pronounced when I crack the throttle. I do have a slight miss when idleing. This is a stock S2 as far as I know. I live in Denver so the air is a little thin. But, the deal is, it ran fine until above mentioned events. I did have a little problem with some gas from the overflow, but that resolved itself. I really appreciate any input as I am getting pretty frustrated not riding. Also, this forum is my service shop, the ones around here suck,,,plus I am a poor s.o.b. and dont have the $$. thanks for your help,,, jm |
