G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kumasan50 Posted on Sunday, March 27, 2005 - 01:53 pm:        I am switching to carburetion on my 1999 X1. As many of you are shaking your heads right now, I need to know a few things. Is it possible to utilize the existing ignition wiring and coil? If so, how do I wire it up? If not, what parts do I need to change and do you have any suggestions on brands? I have a Mikuni HSR42 and forcewinder intake.   Ryker77 Posted on Sunday, June 05, 2005 - 07:06 pm:        how did the conversion go for you?   Rick_a Posted on Tuesday, June 07, 2005 - 01:16 pm:        You can use some of the stock wiring. It would probably be easier to just buy a carb'd harness. You'd have to hack the existing harness so much anyway. There's a few connectors and the little bits that make them up as well you'll have to order. Just spend a few hours with the wiring diagrams. Carbs rock. Good luck.   Ryker77 Posted on Monday, June 27, 2005 - 01:24 pm:        http://www.badweatherbikers.com/buell/messages/47623/124108.html?1119892124 can you respong to the above post? I'm curious did you keep the stock ECM and ignition?   Ryker77 Posted on Monday, June 27, 2005 - 01:24 pm:        http://www.badweatherbikers.com/buell/messages/47623/124108.html?1119892124

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: