Author |
Message |
Dennis_c
| Posted on Saturday, March 05, 2011 - 12:37 pm: |
|
sold my ULY and got a 1125R |
Wolfridgerider
| Posted on Saturday, March 05, 2011 - 01:18 pm: |
|
you be crazy!! CONGRATS! |
Squidravioli
| Posted on Saturday, March 05, 2011 - 03:19 pm: |
|
Changed the oil and aired up the tires. Now it just needs to warm up! |
Mikef5000
| Posted on Sunday, March 06, 2011 - 12:26 am: |
|
When you moving in to your new house? Closing this Wednesday! Considering I only have one day a week to work on/in it, it's likely going to be about a month to month and a half before it gets painted and furnished and ready for full time living. But we'll see. COBRA ride to cookout sometime this spring! |
Wolfridgerider
| Posted on Sunday, March 06, 2011 - 08:44 am: |
|
your tv awaits... along with a DVD/surround sound system. |
Dennis_c
| Posted on Sunday, March 06, 2011 - 03:00 pm: |
|
I hope not well wait and see |
Birdy
| Posted on Sunday, March 06, 2011 - 06:35 pm: |
|
So Dennis ya got the 1125? Good deal BUT I guess that riding the KLR next time we meet up is out...my XB won't keep up with a 1125 so the 650 is out! IF it ever warms up and the flood water drain off I'll give yo a call. I'm moving at the end of the month so looks like things will start shaken' after that. |
Dennis_c
| Posted on Sunday, March 06, 2011 - 07:22 pm: |
|
If you go off road you will be faster than me |
Squidravioli
| Posted on Monday, March 07, 2011 - 04:48 pm: |
|
Does anyone have any experience using the ECMSpycable and software? I am considering buying it for my X1. CEL comes on and off, I was hoping to figure out why. Where do you hook the cable up to on the bike? |
Thump4fun
| Posted on Monday, March 07, 2011 - 05:32 pm: |
|
I have both a cable and the software, but I'm not much of an expert. You can borrow the cable anytime you like (PM sent about software). John Haignere (shagg1970) has quite a bit of experience, you might hit him up. |
Squidravioli
| Posted on Monday, March 07, 2011 - 06:36 pm: |
|
Thanks Thump |
Nukeblue
| Posted on Tuesday, March 08, 2011 - 04:20 pm: |
|
hey birdy, you might be able to keep up. dennis got a really slow 1125....heh heh heh |
Squidravioli
| Posted on Wednesday, March 09, 2011 - 02:21 pm: |
|
Is it advisable to have a the TPS & AFV rest on my 00' X1 as a preventative maintenance? There is an HD dealer near my home and the cost is pretty reasonable to have them both done $68.00. My bike runs great but it slow starts and won't hold an idle right off the bat without giving it gas for 30 seconds or so. I'm not really interested in doing an ECM Spy as I have ZERO mechanical background. When it idles it almost sounds like one cylinder is firing, but you ride it and that can't be possible it flat out flies. |
Fick15
| Posted on Wednesday, March 09, 2011 - 10:26 pm: |
|
did you check your plugs?? For some reason mine does it too. i'm assuming my map on my ECM is all tweeked and i'm trying to get the default map for my race ecm. If you need your TPS reset i have a laptop and ECMspy and cable, and i can meet you and do it for you... it's not hard and only takes a few mins and would save you 60 or 70 bucks that HD is wanting. I'm pretty sure my ecmspy plug works on your bike. |
Squidravioli
| Posted on Thursday, March 10, 2011 - 08:24 am: |
|
Maybe I should throw in some new plugs as well! It is hard telling when new ones were put in. |
Squidravioli
| Posted on Monday, March 14, 2011 - 12:37 pm: |
|
Warm weather headed our way this week! Too bad it is on Thursday though, too many drunks out to enjoy a good ride. |
Squidravioli
| Posted on Friday, March 18, 2011 - 11:44 am: |
|
Has anyone ever changed a crankshaft seal on an X1? I am getting some puking out of the primary vent hose. From the forum searches I have done it looks like the primary side crankshaft seal needs replaced. Any help would be great! |
Ohbuellman
| Posted on Sunday, March 20, 2011 - 07:28 pm: |
|
MotoGP at Qatar on a 55-inch LCD with surround sound is just awesome (finally junked the 20 yr old 28-inch beast)! Looking forward to the next AMA race. Am in the market for a set of 1-pc leathers. Any endorsements? Pilot? Vanson? |
Mikef5000
| Posted on Sunday, March 20, 2011 - 09:59 pm: |
|
I changed the crank seal on my M2 Cyclone. Not that huge of a job, but you need an aluminum plate to lock the pulleys. I believe I still have that plate if you need one. |
Squidravioli
| Posted on Monday, March 21, 2011 - 08:55 am: |
|
Thanks Mike! |
Heraldj07
| Posted on Tuesday, March 22, 2011 - 01:32 pm: |
|
Just got a message back from the buell homecomming group. date is set for June 2-5 im planning on going anyone else? |
Dennis_c
| Posted on Wednesday, March 23, 2011 - 08:00 pm: |
|
I hope to |
Shagg1970
| Posted on Sunday, March 27, 2011 - 01:05 pm: |
|
Any one in the central Ohio area That needs mechanical work done I can help. If it is for your Buell or other motorcycle bring a factory service manual if you don't have one give me 7-10 days to get one. I can do about any thing you need from repairs to custom work. For Buells up to 2007 I have ecm spy to tune your bike. I also work on all make and model cars, just ask. You can call or text me Monday through Saturday 8am to 8pm for an appointment or to ask any questions you may have. Thanks, John. 614-440-9488 |
H2opatrol
| Posted on Tuesday, March 29, 2011 - 07:34 pm: |
|
Squid I was thinking about going to the blessing of the bikes, is anyone else interested? Its a long haul to Dayton from here alone |
Thump4fun
| Posted on Tuesday, March 29, 2011 - 08:37 pm: |
|
I'm also planning on going to the blessing of the bikes. Let's work out a place to meet up. |
H2opatrol
| Posted on Tuesday, March 29, 2011 - 09:05 pm: |
|
Name a place Bruce |
Thump4fun
| Posted on Tuesday, March 29, 2011 - 09:57 pm: |
|
You're up in Bellville, right? I'm in Westerville, so maybe something on the north side of Columbus...what about the parking lot at AD Farrows in Sunbury? Anybody else thinking of going? |
Arctic9r
| Posted on Wednesday, March 30, 2011 - 10:37 am: |
|
i'm a possible show up for that ride.... meeting up at northstar would be cool with me. |
Wolfridgerider
| Posted on Wednesday, March 30, 2011 - 03:53 pm: |
|
SPRING HAS SPRUNG!!!
WELCOME TO OHIO |
H2opatrol
| Posted on Wednesday, March 30, 2011 - 06:41 pm: |
|
I cleared it with the warden and took the day off. You guys decide on the spot and I'll pray for the weather... |