| Author |
Message |
    
Axil5
| | Posted on Friday, February 15, 2008 - 12:42 pm: | 
|
not a problem... its pretty slow today at work so i will probably sketch out of here early... the tires shouldnt take to long to mount up |
Coturi
| | Posted on Friday, February 15, 2008 - 01:59 pm: |
|
Thanks Sam. I'll see you guys this afternoon.
Bill, give me a call sometime if you're still alive. |
Bhemph0
| | Posted on Friday, February 15, 2008 - 03:41 pm: |
|
Hey Guys I'm here, just trying to figure out how to ride the bike & ride the snow both this weekend. Right now the call is tomorrow afternoon north of the freeway on Black's Creek rd. There is still snow there & the reports have been that this is "the place" hope to go out & will report back. Snow should be ok for at least this weekend. Anyone else interested? about time to get some bike rides on! |
C4bird
| | Posted on Saturday, February 16, 2008 - 12:25 am: |
|
I got some time on the saddle today, actually rode by blacks creek. There is a bit of snow of north, but was melting pretty good, lots of sand. Found out the 1125 will go way over the speed limit in 6th, still staying below the 6k breakin limit  |
C4bird
| | Posted on Saturday, February 16, 2008 - 12:27 am: |
|
Jeremy, I've still got that ECM on the shelf, you still interested? |
Coturi
| | Posted on Saturday, February 16, 2008 - 06:16 pm: |
|
Sam, Jeremy and I were going to head out for a ride tomorrow afternoon. So if anyone is interested let me know. |
C4bird
| | Posted on Sunday, February 17, 2008 - 09:10 pm: |
|
Dang, I wish I had checked last night, I was out this afternoon. Hope you guys had as nice a ride as I did, nicest day yet this year |
Lazyj
| | Posted on Monday, February 18, 2008 - 12:23 am: |
|
C4; I want the ECM. I will be off work Monday if you want to try and meet up just give me a call and I will bring out the cash. 484-3661
Bill, I am ready at anytime for the exhaust, got the tax returns couple days ago.
(Message edited by lazyj on February 18, 2008) |
C4bird
| | Posted on Monday, February 18, 2008 - 09:09 pm: |
|
Jeremy, Sorry I missed your post, I've got long shifts this week, but off Fri-Sat. Let me know if one of those days works and I'll give you a call toward the end of the week.
-Nate
(Message edited by c4bird on February 18, 2008) |
Lazyj
| | Posted on Tuesday, February 19, 2008 - 12:40 am: |
|
Nate, not a big deal, im actually in no rush to get it but will take it off your hands since i intend to do the exhaust eventually. there is a good chance i may be leaving town this weekend so the only day i might be able to hook up is friday. Anways if not then we can work another time out. |
Lazyj
| | Posted on Tuesday, February 19, 2008 - 03:24 pm: |
|
I have to admit It was worth the money!
|
C4bird
| | Posted on Tuesday, February 19, 2008 - 09:44 pm: |
|
That looks dang good Jeremy, I'll give you a call on Thursday evening, should be able to work something out Friday. |
C4bird
| | Posted on Thursday, February 21, 2008 - 05:08 pm: |
|
Wow, crazy week this week. Meteor, Lunar eclipse, earthquake. Must have been at the right place at the right time, I got to experience all 3!! |
Lazyj
| | Posted on Friday, February 22, 2008 - 10:35 am: |
|
"its the end of the world as we know it"
Nate I will be calling you back today. Sorry I got busy last night and couldnt get a chance to call you back. |
Bhemph0
| | Posted on Friday, February 22, 2008 - 12:42 pm: |
|
Looks great Jeremy! Hey Mike & Sam, winter is still here, Call me tonight if interested in going out to Blacks Creek (slacker flats) or the Camas Prarie. |
Lazyj
| | Posted on Friday, February 22, 2008 - 01:40 pm: |
|
Thanks Bill.
Also I am ready for an exhaust anytime. ;) |
Bhemph0
| | Posted on Friday, February 22, 2008 - 04:27 pm: |
|
Jeremy, I kept the dual outlet pipe for you. HD in sandy Utah bought all my other pipes so I will soon be putting my welding hat back on. Also this weekend at the snowmobile park on HWY 20 there is a competition for snow kiting (Google snow kite Idaho) there is a race and they built a 20 foot kicker. I will be bringing my camera! |
Coturi
| | Posted on Friday, February 22, 2008 - 06:52 pm: |
|
Bill, when is it? I'd love to go check it out, and kite myself sometime this weekend. |
Lazyj
| | Posted on Tuesday, February 26, 2008 - 03:48 pm: |
|
Bill, any chance you feel like dealing with an exhaust this weekend? |
Bhemph0
| | Posted on Tuesday, February 26, 2008 - 04:31 pm: |
|
Jeremy, give me a call. Mike, I ordered a blaze 8.5 in Blue. |
Tnash71
| | Posted on Tuesday, February 26, 2008 - 04:33 pm: |
|
How's everyone doing? I am coming up on my 20K service on my Uly and wanted to bounce some things off you BABers. The four things I can't do myself are; Timing, TPS Reset, Fork oil/seals and Steering head adjust. I was just quoted that these four things require a grand total of 5.3 hours time. WOW?!?! Seems a little excessive.
Here's the breakdown:
Ign. Timing = .3hr (ECM breakout box and volt meter)
TPS Reset = 1.5 hrs (VDSTS on Dyno)
Fork oil/seals = 2.5hrs (special tool and a few basic inexpensive parts)
Steering head adjust - 1hr (resistance measure and adjust)
Around $400!!! For a fraction of the 20K service procedures required! People would never buy cars if they had to pay this much to service them...at 20K none the less.
Does this seem excesive...any thoughts or alternative approaches? At this price I would have to be a chump not to buy the tools (I've priced them, easily less than $300). I won't need a dyno...I can take this on the street with a $10 used Palm Pilot. Hey let's all pitch in and buy this stuff...figure it out and between Coturi's tire machine we could really git'r done. Every 6 month's we could have a weekend maintenance retreat and take care o'biz.
(Message edited by tnash71 on February 26, 2008) |
Coturi
| | Posted on Tuesday, February 26, 2008 - 07:08 pm: |
|
The tps reset is a half hour job from the dealer, so they must be mistaken.
And, I've already bought enough damn tools. |
Lazyj
| | Posted on Monday, March 03, 2008 - 10:55 am: |
|
Bill thanks again for a great pipe. The only complaint I have so far is......now I have to listen to all the IL4 riders whine to me about how they cant hear their bikes over mine when I go by.....HAHA! |
Coturi
| | Posted on Monday, March 03, 2008 - 11:41 am: |
|
Jeremy, now I can actually hear you next to me?
Wait, now I'm the only one without Bill's pipe on, I'm such a rebel. |
Lazyj
| | Posted on Monday, March 03, 2008 - 02:07 pm: |
|
yeah, pretty sure its noticeably louder. Had to run out and buy more earplugs. |
Bhemph0
| | Posted on Tuesday, March 04, 2008 - 11:15 am: |
|
Jeremy, Glad your happy with your pipe sure sounded good when you left my house. I wanted to get a pic before you left, how about posting a pic showing the dual outlet? |
Lazyj
| | Posted on Tuesday, March 04, 2008 - 12:17 pm: |
|
I will try to get the company camera and take some pics.
FYI to all you guys... HDHD is charging about $100 to do TPS resets. or 1.5 hours labor.
RIDICULOUS!
I dont remember who has the software to do a TPS I think CMS (CHAD)??? Anyways...I'd be interested in giving you 50 bucks if you can hook me up with a TPS JOB.
(Message edited by lazyj on March 04, 2008)
(Message edited by lazyj on March 04, 2008) |
Axil5
| | Posted on Wednesday, March 05, 2008 - 12:02 pm: |
|
hey j
give me a call if ya can...
724 0140 |
Lazyj
| | Posted on Monday, March 10, 2008 - 11:53 am: |
|
Sam thanks again for the invite, had fun, sorry about all the dealing errors......its been a long couple of months for me and the brain......is pretty much in space cadet mode these days. |
Lazyj
| | Posted on Tuesday, March 11, 2008 - 06:53 pm: |
|
Dont let your throttle lock get stuck on accident while pulling a 12 o clock on the connector
|
|
BAB (Boise Area Buellers) »
BAB Archives »
Archive through March 11, 2008