Author |
Message |
Odie
| Posted on Wednesday, December 07, 2005 - 02:15 pm: |
|
Deadman, along these lines could you check to see (and I'm sure they are not but....) if the heat shield on the outlet of a Uly pipe is available by itself?? Thanks mucho... |
Deadman
| Posted on Wednesday, December 07, 2005 - 04:23 pm: |
|
Odie: The stock one is welded in place. I'll have another Xb12X pipe coming to you next week. After you cut out the back, you could perform a Dremel-otomy? I also need an airbox heat barrier on its way ASAP... |
M1a65
| Posted on Wednesday, December 07, 2005 - 04:33 pm: |
|
Sanchez, For those of you who don't have saddle bags there's always the "useful" straps under tuber seats to use a bungy on. That red paint is too nice to tear up. |
M1a65
| Posted on Wednesday, December 07, 2005 - 04:35 pm: |
|
The fumes coming off those tater tots is causing strange reactions amongst the crowd... |
Shred
| Posted on Wednesday, December 07, 2005 - 05:03 pm: |
|
M1a65, Hows that chest cold doing? I saw some nice INK at work today at on the job site, color looks good when its done right. Get any more INK? I've spent some $$$ on the bike so I hope to get phase three done on the right shoulder at Christmas. |
Buell666
| Posted on Wednesday, December 07, 2005 - 05:07 pm: |
|
I GIVE THIS POST 5 STARS. |
New12r
| Posted on Wednesday, December 07, 2005 - 05:20 pm: |
|
I gave it one, your post is crappy! |
Buell666
| Posted on Wednesday, December 07, 2005 - 05:25 pm: |
|
EAT MY A$$ SQUID BOY!!! |
M1a65
| Posted on Wednesday, December 07, 2005 - 06:29 pm: |
|
NAh Mike, Saving some skin (and money) for when I'm in a shop. Got a deal in the works for an apprenticeship for 5G's but the guy wants full wack all at once. Usually when I hand over that kind of dough I get some wheels in the process... We'll work it out. The colds getting better, haven't been to a smokey bar in some time (givin the lung a rest). Hope to be back in the saddle for next weeks V meeting. |
M1a65
| Posted on Wednesday, December 07, 2005 - 06:35 pm: |
|
For those of you into tribel ink a friend in Marietta is quite reasonable and can hook you up when your ready. |
Mountainrider
| Posted on Wednesday, December 07, 2005 - 08:55 pm: |
|
We have not had a sucky winter in a long time and so far this one sucks. Looks like snow and ice for the next two days and then it will be salt and gravel. |
Glitch
| Posted on Wednesday, December 07, 2005 - 09:21 pm: |
|
We have not had a sucky winter in a long time... Just goes with the wettest summer in history we just had.
|
Odie
| Posted on Thursday, December 08, 2005 - 12:38 am: |
|
Deadman- airbox barrier on it's way tomorrow. Will be looking for the pipe next week too. Thanks, Odie. |
Glitch
| Posted on Thursday, December 08, 2005 - 07:57 am: |
|
|
Deadman
| Posted on Thursday, December 08, 2005 - 11:14 am: |
|
Thanks, Odie! |
Braveangel
| Posted on Thursday, December 08, 2005 - 11:33 am: |
|
Hey Glitch what's up with the voting an rating under each posts name? What is it for ? just curious. By the way Odie I received the pipe, but I haven't put it on the bike yet . It's been to cold for me to hang in the barn lately . I'll see if I can keep new12r home this weekend to get it put on. Can't wait to hear it! I really can't wait to get my doctor's approval to ride again. I miss my baby. I feel really bad, like I'm neglecting her. |
Odie
| Posted on Thursday, December 08, 2005 - 12:50 pm: |
|
Deadman- heat barrier on the way via UPS. B_A- I didn't realize you already had an aftermarket pipe on your bike. If you would/could run it for a moment and see what it sounds like etc. I would appreciate it. Thanks, Odie. |
New12r
| Posted on Thursday, December 08, 2005 - 05:03 pm: |
|
Odie, oh magnificent one, Smokescreen wanted to know if you have a tail section for a swap already made so he would have no down time? If not no worries. We will get the pipe on, did you need it back? If so I have no problem getting it back to you. I was looking at it and it looks like you only made a couple cuts and no welding? I want to hear it because the Vance & Hines is almost to loud. B-666 this is for you!!!! |
Shred
| Posted on Thursday, December 08, 2005 - 05:51 pm: |
|
What a cold and nasty day. I'M whooped.. I'm already dreaming for spring and summer. The asphalt is hot and sticky. |
Stealthxb
| Posted on Thursday, December 08, 2005 - 06:23 pm: |
|
|
Mountainrider
| Posted on Thursday, December 08, 2005 - 06:32 pm: |
|
Hey Stretch do you guys have any shirts like the white long sleeve in the upper corner? http://www.h-dappleton.com/partpics/buellshop/HPIM0363.JPG |
Mtnchld
| Posted on Thursday, December 08, 2005 - 09:39 pm: |
|
What a cold and nasty day. I'M whooped.. I'm already dreaming for spring and summer. The asphalt is hot and sticky Shred- I'm with you on that one. Last night it was -19 (not counting the windchill) then we got to wake up to -15 degrees and it never got above 9 all day- whoohooo!!!! |
Kdan
| Posted on Thursday, December 08, 2005 - 10:40 pm: |
|
then we got to wake up to -15 degrees and it never got above 9 all day- whoohooo!!!! Wah. Hang in there Mtnchld. Spring will come sometime in May! Mebbe June. |
Odie
| Posted on Friday, December 09, 2005 - 12:28 am: |
|
New12r- the pipe is yours to keep. I would just like to get some feedback from ya'll. I can have a Grater done by Monday or Tuesday and get it out if that works for everyone. I will just need the stock one back ASAP; the Grater Eliminators alone are keeping my very busy. Let me know....Odie |
Mountainrider
| Posted on Friday, December 09, 2005 - 06:39 am: |
|
Looks like a good weekend to ride. We did not get any snow or ice last night. The roads will be nice,all but 180. |
New12r
| Posted on Friday, December 09, 2005 - 06:43 am: |
|
Odie I will give you a call later and let you know if Smokescreen still wants to do it, thanks. |
Black_sunshine
| Posted on Friday, December 09, 2005 - 07:39 am: |
|
I WILL ride this weekend no matter how cold it is! Even its around my neighborhood racetrack. I have been sooo busy lately my poor baby has been neglected. S_B...I will try to come to your shop around noon to get a estimate for Chrissy's car. How long do you think it will take? Glitch....I have some heat moldable foam here at the office. The kind you put in a kayak for floatation. I am gonna rig up a video camera mount that will strap to my airbox cover. I'll post pics if it works out. I really want to get a chase video on Hwy 60 and put some hardcore devil music to. |
Glitch
| Posted on Friday, December 09, 2005 - 07:51 am: |
|
I am gonna rig up a video camera mount that will strap to my airbox cover. Would it be possible to make one for the seat? A film looking back at the front of another bike would be cool too. I never could get mine to stay still. The foam is a good idea, one I may have to use as well, maybe with that expandable foam used for shipping. Great idea. |
Black_sunshine
| Posted on Friday, December 09, 2005 - 08:28 am: |
|
Glitch....Yes....I will make a multiposition mount that can be used anywhere on the bike there is a flat spot. That way we can swap it on anyones bike so you can film each other. |
Glitch
| Posted on Friday, December 09, 2005 - 08:30 am: |
|
Sounds good! Now...about the weather... |