G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kaese Posted on Tuesday, February 22, 2005 - 08:13 pm:        This may be a stupid question, but I cannot find the nut that tightens the end mirror ball pivot. The only ones that I can find are by the faring. I have installed the 04 mirrors on my 03 XB9R. What am I missing? Thanks   M1combat Posted on Tuesday, February 22, 2005 - 08:18 pm:        My assumption would be that they are behind the mirror...   Duff24 Posted on Tuesday, February 22, 2005 - 08:59 pm:        i don't think you'll be able to tighten them once they've come loose on the ends...i had the same problem   Mookie Posted on Tuesday, February 22, 2005 - 10:19 pm:        um, its possible to do. I do remember being able to do it. it may be behind the rubber boot on the mirror   Kaese Posted on Wednesday, February 23, 2005 - 10:54 am:        Duff, did you end up replacing it?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: