G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dago Posted on Sunday, February 13, 2005 - 11:32 am:        I'm about to install a new clutch cable, but have one question that I couldn't find the answer to in the archives: Is it safe to remove the bolt that secures the metal clasp that secures the clutch cable to the right-hand side of the tie bar assembly? I'm concerned that if i remove that bolt, the engine may fall a bit. does the tie bar assembly support the weight of the engine? (Message edited by dago on February 13, 2005)   Glitch Posted on Sunday, February 13, 2005 - 11:40 am:        It'll be OK. Nothing will happen. Looks familiar?   Dago Posted on Sunday, February 13, 2005 - 11:44 am:        Thanks Glitch. That top triple looks Badd-A$$! Nice call on painting it.   Glitch Posted on Sunday, February 13, 2005 - 11:48 am:        Thanks, still getting used to how different everything is, but so far I like it a lot. How much shorter is the R clutch cable?   Dago Posted on Sunday, February 13, 2005 - 12:59 pm:        I'm not sure. It's hard to say now that the new one is on. But I'd say a 2-4 inches?   Roc Posted on Sunday, February 13, 2005 - 03:28 pm:        Take care screwing the cable into the primary cover, it is easy to over tighten and break.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: