G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rtlll Posted on Thursday, August 27, 2020 - 01:51 pm:        Have an XB12XT and the thread in the swing arm for the rear axle shaft has a bit of damage. Would like to chase the thread in the swingarm but not quite sure of the thread size. Cannot find in manuals or on-line. LH thread measures close to a 1.125"-12 or an M28 x 2. Anyone have the exact size for this thread ? Thanks, Rick RTLLL@yahoo.com   Mnscrounger Posted on Thursday, August 27, 2020 - 04:03 pm:        I just cut an adapter plug to use blast axle in there, I can confirm it IS 1 1/8" 12, but it is not left hand thread, it is right hand.   Rtlll Posted on Thursday, August 27, 2020 - 09:30 pm:        Thanks for the input Steve, 1 1/8" - 12 RH thread it is. I start working on getting a tap. Thanks again, Rick

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: