| Author | Message | ||
     U4euh |
Hey XBees, because of my recent transplant I thought I would tinker a bit. I took the stock muffler off. Started it a couple of times to hear how loud it really was. Decided that I would wait to modify exhaust. Re-installed the stock muffler. Now the front cylinder is not firing, or if it is,not like it should. I used WD-40 on the exhaust header and the rear cylinder evaporates instantly, the front just drips to the ground. The pipe itself feels mildly warm, as I can wrap my hand around it. What gives? Any suggestions or info is greatly needed & appreciated. Doc says I can ride first week of DEC. I don't want to miss that chance due to bike not running. HELP  | ||
| Daves |
Fouled plug in the front cylinder? Loose plug wire to the coil? Probably a fouled plug from starting it up for a few minutes and then shutting it off and starting it again. They don't like that. | ||
| Wyckedflesh |
I fouled the plug when I did that. In this case I think its more from not having the exhaust in place based off the amount of flame coming out of the end of the header on deceleration  | ||
| U4euh |
I appreciate the suggestions. Looks like I'll go ahead and change the plugs. Daves? Got any of the hi performance plugs in stock? How about the K&N filter? Shoot me an email with your phone number and I will try to call as soon as I can. Will you be working the weekend? If any body else has any other suggestions, please holler. Sounds like I got the advice I needed, but the more info I have going under the hood so to speak, the better I feel. JIM | ||
| Daves |
I have both in stock for you. Filter is 64.95 Plugs are 7.95 each Total 80.85 Badweb price 72.77 1-866-757-1651 ask for Dave in the sales dept. I'll be here til 7 tonight,7 tomorrow night and 4 on Sat. | ||
| Fullpower |
flames on decel..... very nice. next time try and get us some photos. |
