G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Loosegoose Posted on Sunday, April 08, 2018 - 12:01 am:        Hi guys, I'm about to rewire my series-wound 2008 Ulysses stator. 12u magnet wire (instead of 13 u), J B Weld epoxy for base coat along with Captan tape. ...... I need to know what potting compound to use ( high thermal conduction & high electrical resistance)   Cyclone8u Posted on Sunday, April 08, 2018 - 03:20 am:        At one point I was considering building my own voltage regulator and this is what I was looking at: https://www.amazon.com/MG-Chemicals-Thermally-Cond uctive-Encapsulating/dp/B008UH4CRM Chemical resistant as well, which I think would be extra critical for the stator application. Post pics of the build process if you can, I'd love to know how the change in wire gauge affects the current output when you get it done.   Cyclone8u Posted on Sunday, April 08, 2018 - 03:24 am:        Hey, I just looked at your profile and I see you just joined. Welcome aboard mate!   Natexlh1000 Posted on Monday, April 09, 2018 - 08:48 am:        This guy is brilliant and did a great write-up for his 1125: http://hildstrom.com/projects/buellstator/index.ht ml His other projects are fascinating too.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: