| Author | Message | ||
     Madisonm55 |
Iv got a Taylormade 240 rear tire kit and my belt tensioner had to be spaced outward as well as some other parts. With my free spirits tensioner and the spacer there is only about a mm left on the studs to screw the nut on. Is there any way to lengthen the studs by either drawing them out farther or getting new ones. Im not even sure if they can be removed and wouldnt know how to go about getting new ones. Anyone have any input? | ||
| Phelan |
They are a separate part number and should be removable with heat and the right tooling. You can try double butting them, or welding nuts onto the shafts, to get the bite needed to remove them after heating up the loctite to break them free. | ||
| Brother_in_buells |
With heating it up a pipe wrench could do the trick! |
