G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Misato Posted on Wednesday, October 20, 2004 - 03:06 pm:        new force pipe   Stealthxb Posted on Wednesday, October 20, 2004 - 03:10 pm:        Sweet!   Ingemar Posted on Wednesday, October 20, 2004 - 03:38 pm:        Buellgator has just let me know that peak torque lies around 3500 rpm. Talkin' bout a sweet ride   Hogs Posted on Wednesday, October 20, 2004 - 03:41 pm:        Misato is that the same pipe as yours or all together different??   Buellgator Posted on Wednesday, October 20, 2004 - 03:55 pm:        Thank you for posting those. The power it makes is good I wish it was a little better, but Scott at Cycle-Rama said he did his best. Bet you can't guess what they said was the weak point in the system.   Darthane Posted on Wednesday, October 20, 2004 - 03:58 pm:        Gator, what else has been done to your bike besides the Force treatment (pipe, header, PCIII, and HIPO O2)?   Buellgator Posted on Wednesday, October 20, 2004 - 04:02 pm:        Force Exhaust,PCIII,NRHS 1050 kit, NRHS stage 3 heads, bored out throttle body, Hillbilly Motors F.A.S.T. system. It's way faster than it used to be.   Stealthxb Posted on Wednesday, October 20, 2004 - 04:03 pm:        What's the weak point Gator?   Misato Posted on Wednesday, October 20, 2004 - 04:05 pm:        different, mine is the first gen. which I have not got a replacement, nor have I been informed as to WTF they are doing. they never replied to my last email about it. hmm, about a month ago now. well mine is at 78hp with K-N, force, PCIII, drilled 12 box.   Misato Posted on Wednesday, October 20, 2004 - 04:12 pm:        force pipe?   Buellgator Posted on Wednesday, October 20, 2004 - 04:19 pm:        Misato wins. They said I could increase my driveability with a different exhaust. Another thing that worries me is that Scott told me that there were a couple of places in the fuel map that the PC3 was maxed out and the bike was still running a little lean. He suggested that I get the Buell race ECM that is completely programmable and that I try a different exhaust.   Misato Posted on Wednesday, October 20, 2004 - 04:48 pm:        time for bigger injectors? what about from a 12? justin said the stock 9's are fine for even the 12 kit...   Buellgator Posted on Wednesday, October 20, 2004 - 05:00 pm:        justin said the stock 9's are fine for even the 12 kit... I'm sure that they are but I think the Force exhaust or possibly the combination of all the components the stock injectors just aren't good enough.   Misato Posted on Wednesday, October 20, 2004 - 05:02 pm:        hmm, yours is the 'exact' combo I was talking to him about when he said that. Might be ok up where there is no AIR!!!!!!! not at sea-level.?.   Wyckedflesh Posted on Wednesday, October 20, 2004 - 07:47 pm:        It would be interesting to see the A/F chart so we can see where the motor is leaning out. If its below 3500 then the PCIII won't be able to affect anything. If its above 3500 well that is the area outside the box that the PCIII can effect.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: