| Author | Message | ||
     Ilikehotchicks |
I have a 2003 zx6r ninja, that i wrecked. I had a d&d pipe on it, Im wondering if i can mount up my slip on from my zx6r to my firebolt? its pretty much the same size/shape as a jardine, Also does anyone know what the size pipe is at the bottom of the headers that connects to the muffler? ben | ||
| Odie |
If I remember correctly it's 2". I'm at work right now but I can tell you for sure at about 1130 CST tonight....Odie | ||
| BadS1 |
Ben yeah you could do it,why not.I seen a tuber V&H that someone put on a firebolt that was listed on the BadWeb a few months ago and it looked pretty good. | ||
| Captainplanet |
If you could get Jardine to sell you just the 90 degree pipe that connects the XB header to the jardine pipe, that would probably make it work. That would allow you to mount just about any pipe with a straight in inlet. | ||
| Odie |
Yes, it is 2" inlet into the pipe. Sorry I didn't post last night but had to work overtime and didn't get home until 0330......Odie | ||
| Odie |
Go to a decent muffler shop and they can bend what you need and expand your pipe ends to fit perfect. Probably $15 max....Odie | ||
| Captainplanet |
go here for pics of that 90 degree on the jardine. http://www.badweatherbikers.com/buell/messages/32777/55998.html?1083538422#POST2 57413 | ||
| Ortegakid |
That's virtually what I did,my local muffler shop made the inlet and out,welded it all,cost$20.00 total, made my own fairing brackets out of stainless sheetmetal, 8,000 miles on it, no problems aside from the packing doesn't last long enough. | ||
| Ilikehotchicks |
nice, thanks guys ill have to try this out! ben | ||
| Starter |
There's an XB running around here with a Yosh bolt on from the CBR600RR. Looks cool but sound a little puffy. |
