G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xbrad9r Posted on Sunday, August 31, 2014 - 12:05 am:        After three years without, I am back on a Buell. I just swapped for a 06 Uly. The cooling fan is not running and I have checked the fuse which is OK. What is the list of checks I need to do? The ECM, the engine temp sensor, connector on the fan, what else?   Readyxb Posted on Sunday, August 31, 2014 - 12:18 am:        With Tunerpro RT of ECMSpy, issue the Fan Test command. The fan should activate briefly regardless of the engine temp sensor status. Also, just do some sanity checks, such as be sure the fan can be spun freely with your hand.   Xbrad9r Posted on Sunday, August 31, 2014 - 01:03 am:        Will do. Thanks   Gabby_duck Posted on Sunday, August 31, 2014 - 09:38 am:        Disconnect fan connector from harness.place a jumper wire between fan Y/BN wire and battery positive. Place a jumper between BK wire and ground. Does fan run at full speed if yes fan is good if no replace fan.   Xbrad9r Posted on Monday, September 01, 2014 - 06:20 pm:        Thanks Ready & Gabby. I haven't had a chance to look at it again yet. I will update when I do.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: