Author |
Message |
Jad2
| Posted on Wednesday, September 08, 2004 - 09:46 pm: |
|
So have any of you addressed all the noise that comes from the back seat fitting so loosely? |
Jad2
| Posted on Wednesday, September 08, 2004 - 10:16 pm: |
|
I guess I should have specified that this is on an R |
Deerhunter17
| Posted on Wednesday, September 08, 2004 - 10:23 pm: |
|
couple of HD soft cloths wadded up in the storage compartment stopped mine from rattling around.. was'nt planned that way,.. just happen to be. |
Mikle
| Posted on Thursday, September 09, 2004 - 05:30 am: |
|
I put a Buell tail bag on mine and it stopped the noise. |
Darthane
| Posted on Thursday, September 09, 2004 - 08:19 am: |
|
Get a relatively thick piece of foam tape, place on underside of seat. Tada. KISS |
Jad2
| Posted on Thursday, September 09, 2004 - 08:25 am: |
|
Bryan, That's actually what I was thinking. I just wanted to see what others had done. Thank you... |
Darthane
| Posted on Thursday, September 09, 2004 - 09:26 am: |
|
As a side note, I also have the tail bag - it's usually on (works to eliminate rattle), and I've often got too much stuff crammed into the trunk (also eliminates rattle). I've noticed since I switched my plastics to the XB12R black that the seat requires more effort to latch (it will not latch itself if dropped like it used to), and doesn't rattle even if none of the three conditions are present. -=shrugs=- |
Xb9er
| Posted on Thursday, September 09, 2004 - 04:11 pm: |
|
Hmm. I thought it was possible to adjust the latch. Mine hasn't made any noise. Mike. |
|