Author |
Message |
Shadowracerx1
| Posted on Sunday, April 20, 2014 - 05:03 pm: |
|
I have a micron exhaust that did not come with the chin fairing support. I've purchased one from Dean but now I need to figure out what nuts/bolts are needed to actually use it on the bike. Any help would be greatly appreciated. Thank you. |
D_adams
| Posted on Monday, April 21, 2014 - 07:12 am: |
|
Wish I had known it was for a micron, it may not fit, although it fits pretty much everything else out there. Give me a call or shoot me an email. |
Brother_in_buells
| Posted on Monday, April 21, 2014 - 09:27 am: |
|
I haven't installed the micron i have ,but this is what i got. 1- 159/181 dia band clamp 1- 2hole tapped bar 1- 3hole tapped bar 7- M6 x 20 button head screw 1- M8 x 50 cap head 4- M8 x 12 hex head screw 9- M6 washer 4- M8 washer 2- M8 repair washer 2- M6 nylock 1- M8 nylock 2- cable ties
|
Ducbsa
| Posted on Monday, April 21, 2014 - 03:06 pm: |
|
Maybe bolt the straps to the fairing while it is off the bike to see where it fits and how it would tie into however it mounts to the bike? |
Shadowracerx1
| Posted on Wednesday, April 23, 2014 - 02:17 pm: |
|
Thank you. |
D_adams
| Posted on Tuesday, May 13, 2014 - 08:23 am: |
|
Confirmed fit for guys with a micron exhaust and missing the brackets. Muffler needs to be removed to install the kickstand side bracket.
|
|