G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Valiant_duke Posted on Monday, February 03, 2014 - 01:11 pm:        I am in need of replacement gaskets and the quotes that I am receiving are much higher than I remember them being (like $28.00 for one)! Where is everyone purchasing their gaskets now-a-days? I am looking for a Transmission inspection gasket, a transmission drain plug gasket, and an oil drain plug gasket. This leads to a larger issue, in general where are people purchasing their replacement parts for general wear and tear?   Ericz Posted on Monday, February 03, 2014 - 02:50 pm:        Both primary/transmission and engine oil drain plugs use the same o-ring. HD part number 11105. Are you pulling the primary cover off or just the clutch and/or primary chain inspection covers off? The primary cover gasket is a big one and isn't too cheap. The factory Buell/HD gaskets are the best quality for most of the engine gaskets.   Valiant_duke Posted on Monday, February 03, 2014 - 03:12 pm:        Info Update: I am doing routine maintenance, changing the motor oil and the primary fluid. The gasket that I am looking for is the Transmission Inspection Cover Gasket. (part number 34819-03A, that is what the local HD dealer gave me at least). As for the other part numbers, Ericz you say that both the transmission and motor oil drain plug o-rings are the same? I have two different part numbers (oil: 11105, and trans: 11067). Anyone clarify?   Ericz Posted on Monday, February 03, 2014 - 04:17 pm:        11067 is a retaining ring for the transmission. Both drain plugs and o-rings are exactly the same on all XB models. Yup, the 34819-03A is the primary chain inspection cover gasket. Small two hole football-ish shaped gasket.   Sifo Posted on Monday, February 03, 2014 - 07:34 pm:        Have the gaskets been damaged? I've reused mine over 10 times now and still no leakage. As for drain plug o-rings, I picked up a whole pack of them from Home Depot (HD?) a long time ago. It's also the same o-ring that a Sportster uses on the transmission drain plug that any HD dealer will stock. General wear and tear parts? My first stop is American Sport Bike. Good folks!   Panhead_dan Posted on Monday, February 03, 2014 - 09:14 pm:        "Sifo Posted on Monday, February 03, 2014 - 07:34 pm: Edit Post Delete Post View Post/Check IP Print Post Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only) Have the gaskets been damaged? I've reused mine over 10 times now and still no leakage. As for drain plug o-rings, I picked up a whole pack of them from Home Depot (HD?) a long time ago. It's also the same o-ring that a Sportster uses on the transmission drain plug that any HD dealer will stock. General wear and tear parts? My first stop is American Sport Bike. Good folks!" this is good advice   Teeps Posted on Tuesday, February 04, 2014 - 12:20 pm:        Plus 1 on reusing the primary case inspection cover gaskets, many times. Of course you experience may vary...   2008xb12scg Posted on Tuesday, February 04, 2014 - 01:43 pm:        I get all my parts from americansportbike.com. not only do they almost always have the parts in stock but not many know Buells better than Al.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: