Author |
Message |
Joojoo
| Posted on Wednesday, August 25, 2004 - 01:51 pm: |
|
Hey guys, Ive decided to remove my mirrors....any hints? Did u guys fill the holes in that are left over from where the mirrors mount? Im going to do it tonight, any info that you think may help would be very cool.... Tanx, Jack |
Stealthxb
| Posted on Wednesday, August 25, 2004 - 02:14 pm: |
|
There is a plastic screw you can use to fill the hole. Available at the stealership for way more than it is worth; or you can buy it at most hardware stores. |
Odie
| Posted on Wednesday, August 25, 2004 - 05:11 pm: |
|
Go to Lowes or Home Depot, etc.and get some black plastic push in caps in the specialty hardware drawer. Get a couple different sizes to make sure they fit. Did this on mine when I replaced my stocks with bar end mirrors.... |
Stealthxb
| Posted on Wednesday, August 25, 2004 - 05:20 pm: |
|
And the hole on the left side is shorter than the one on the right, so you may need to trim the bottom of one of the push in caps to get it to fit snugly. |
Fullpower
| Posted on Wednesday, August 25, 2004 - 07:25 pm: |
|
WHY joojoo? what is wrong with mirrors? |
Joojoo
| Posted on Thursday, August 26, 2004 - 12:12 am: |
|
AHAHHAHAHA Fullpower..... Dude. The mirros look as out of place as a fat chick on a Buell... They gotta go. Jack |
Trenchtractor
| Posted on Saturday, August 28, 2004 - 01:46 am: |
|
http://www.themuell.com/article.php?id=14 And my australian stealership charged me 90 cents each for the plugs... By the usual price differential, they should only be 25 cents each for you americans... |
|