| Author | Message | ||
     Easyrider |
Buell XB9/12 04-07 43mm Throttle Body shaft. Twin Motorcycles developed this throttle Body shaft. On all the Buell XB9 and XB12 models 2004-2007. We see a lot of braken shafts. there is no replacement shaft from Buell so you need to buy a new Throttle body for 593 euro excl. VAT. With our shaft you have a much stronger part to. It is made from very high quality chrome 42 steel. This has a higher tensile strength than "normal steel". http://www.twinmotorcycles.nl/webshop/artikel.asp? guid=YXHFSC&aid=5693&cid=0&s=buellxb12gasklepas&a= &aname=Buell_XB912_04-07_43mm_Throttle_Body_shaft | ||
| Ericz |
Does this shaft work with both throttle body bore sizes? I would think the slit for the butterfly would be specific to the butterfly diameter. | ||
| Easyrider |
He Eric, No it doesn't. And it's almost not happening with the other throttle body sizes, and cheaper to buy a used or new throttle body (at the moment) | ||
| Ericz |
The XB12 has a 49mm throttle body and the XB9 has a 45mm body. Which bore size does the shaft fit? | ||
| Easyrider |
Fit's all Buell outside 49mm and inside 43mm Throttle body's |
