G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Petcarv Posted on Friday, March 22, 2013 - 03:33 pm:        I am getting ready to install my new EBR race ECM on my 2007 xb12s jardine exhaust k&n open air box..Other than T.P.S. reset is there anything else I need to do after install?   Froggy Posted on Friday, March 22, 2013 - 03:56 pm:        After installation and a TPS reset you need to head to your favorite set of twisties and the feeling of having a new bike.   Noone1569 Posted on Monday, March 25, 2013 - 09:26 am:        Petcarv, I warn against resetting the TPS yourself with ECMSpy. Not sure how you were intending on the TPS reset. http://www.buellxb.com/Buell-XB-Forum/Buell-Firebo lt-XB12-XB9/Troubleshooting/ECMspy-corrupted-New-R ace-Ecm-   Rchuff Posted on Wednesday, March 27, 2013 - 06:46 pm:        I used ecmspy to set my tps on my ebr ecm worked fine no problems,you just need to know where to set it and it is not stock setting.   Rchuff Posted on Wednesday, March 27, 2013 - 07:20 pm:        After you set the tps go for a ride and NO hard acceleration us 30% throttle so the ecm can learn and 02 sensor ,ride like that till you do around 50 mile,then have fun!   Noone1569 Posted on Thursday, March 28, 2013 - 09:10 am:        Glad it worked fine for you Rchuff. Just reiterating EBR's warning and my own empirical data.   Sifo Posted on Thursday, March 28, 2013 - 11:11 am:        There's something that doesn't make sense to me about the EBR ECM not being compatible with ECMSpy. OK, I can full accept that it may not be compatible, and that ECMSpy could write data to the wrong addressees, but the HD dealer tool would write the data to the same addresses as ECMSpy. Surely HD hasn't spent money developing a tool to work with an aftermarket ECM. Something just doesn't make complete sense, and I'm pretty sure there's more to the story. So does TunerPro play well with the EBR ECM? Frankly, these sort of issues make me happy that I never upgraded from the stock ECM. EBR would do themselves a great service to provide some sort of tool that would allow the home mechanic to safely do the basic install and maintenance of the EBR ECM.   Noone1569 Posted on Thursday, March 28, 2013 - 11:18 am:        The way Danny Bilnosky explained it to me was that the firmware on the EBR Ecms is completely different than prior Buell ECMS and when you connect the EBR Ecm to ECMSpy, for some reason, it changes a couple cells in the firmware and corrupts the ECM. I'm no tuner, computer wizzard, etc, but Danny and I went through three different ECMS before we realized that it was ECMSpy corrupting them. I did nothing in ECMSpy but do a tps reset, which is extremely simple.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: