Author |
Message |
Lboltuk
| Posted on Friday, January 25, 2013 - 01:11 am: |
|
Can anyone tell me the size of the hex bolts that hold on the pillion foot rest hangers (XB12Scg)? I need to fill the empty holes after the PO removed the hangers. Thanks. (Message edited by LBoltUK on January 25, 2013) |
Terrys1980
| Posted on Friday, January 25, 2013 - 08:36 am: |
|
I am pretty sure it's 3/8"-16 |
Terrys1980
| Posted on Friday, January 25, 2013 - 08:38 am: |
|
And they are socket head bolts. |
Akbuell
| Posted on Friday, January 25, 2013 - 09:29 am: |
|
Front (2 ea) 3/8-16X1.0 Socket head Bright zinc Rear (2 ea) 3/8-16X1-7/8 Socket head zinc Rear (2 ea) 3/8-16 Locknut thin zinc |
Lboltuk
| Posted on Saturday, January 26, 2013 - 01:47 am: |
|
Thanks guys. Socket head is what I meant. Was gonna put allen, but didn't at the last minute! That's the exact info I needed. I'll start looking. Edit: Found some in the UK. Thanks guys. (Message edited by LBoltUK on January 26, 2013) |
Ducbsa
| Posted on Saturday, January 26, 2013 - 08:10 am: |
|
Even my daughter at 17 YO couldn't fit on the pillion of my XB12S (maybe my fat ass affected this?), so I took the hangers off and put in shorter bolts. One pair has S hooks attached as bungie hooks. |
|