| Author | Message | ||
     Serialk |
I bought a rear rim from a 09 xbss? 3 bearings no center spacer. Any one know the measurement of this spacer? I measured and cut some aluminum tube but was off by a few thou. I only have enough pipe to get this right one more time! I want it to be snug Any help is appreciated} | ||
| Rays |
This post will be of use to you. http://www.badweatherbikers.com/buell/messages/142 838/474350.html#POST1504686 | ||
| Andymnelson |
Just be sure that you know what you are doing, and that you follow proper bearing/spacer/axle install. The spacer on our rear wheels is far from a trivial item- it is very important that the spacer be proper size and installed properly. For my $$, I would never even consider making my own spacer...they are not that much $$ to get a new one.. | ||
| Al_lighton |
I know I have some in stock, but don't have the THREE Bearing wheel spacer on the website, only the two bearing spacer. I'll fix that Monday. They don't cost much. Al | ||
| Serialk |
Its not the cost factor. its a parts availability factor.Couldn't find anywhere online to buy and Deeleys is showing no stock. which means that could take awhile. so I thought i could cut one up. Al - fix that monday and I will buy one monday. | ||
| Al_lighton |
Hmm, I already had it up there... See http://www.americansportbike.com/shoponline/ccp0-p rodshow/17920.html Al |
