G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Sgthigg Posted on Friday, January 27, 2012 - 09:25 pm:        I absolutely need some help/advice. I had to change the seals on my 05 bx12scg. Got one done, But when I went to tighten the bolt in the bottom of the fork it threaded in and caught to the dampner but just spins, wont tighten and wont loosed. I messed with it for 4 hours. cant get it tight or out. It just spins. Please any suggestions? I am wondering if I cant fix this and am unable to tighten it down atleast does this means my for is shot??   Hogs Posted on Friday, January 27, 2012 - 09:34 pm:        Most of the time,If not all the time one has to use an air gun to spin them on and or to remove same bolt...I guess you all ready did this or??   Sgthigg Posted on Friday, January 27, 2012 - 10:56 pm:        Hogs, Thanks for the tip!!!!! I owe you one. I tried it. got it out. cleaned it up. Ran back in and locked, now im completely finished with the job..oh minus mounting up the forks, etc to the bike. That was the one thing I didnt try and it worked. You not only helped me get the forks done, but now I can sleep tonight. Thanks again!   Hogs Posted on Saturday, January 28, 2012 - 08:04 am:        Its all Good...Glad it worked out for ya!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: