| Author | Message | ||
     Bcp |
Hi, I am in the market for a set of '03 XB forks minus trees. I was wondering how much should I pay for a set? Thanks | ||
| Froggy |
Forks are often damaged in wrecks so they tend to be hard to find in mint condition. I picked up a set for $250 a few years back on ebay. I assume you are putting them on a tuber, hence you want the 03, just an FYI the 04 forks are also the same size. | ||
| Wolfo68 |
I have an extra set if you're interested | ||
| Deanh8 |
What makes the '03s workable for the tuber? | ||
| Nillaice |
it's gotta be the diameter. they went from 41-43mm IIRC | ||
| Bcp |
Thanks Froggy, good to know. Yup gonna put them on a M2. These should just be a direct swap, right. I thought I read somewhere the lower M2 triple trees won't work. Then I read they do. Can you tell me for sure? Thanks | ||
| Froggy |
I can't tell you jack. If your bike has a carburetor, I try to maintain a 50' distance at all times! | ||
| Bcp |
Here what I have so far http://www.badweatherbikers.com/buell/messages/476 23/610672.html#POST2046196 | ||
| Bcp |
I sent you a PM Wolf. | ||
| Guell |
you can use x1 tripples but it lowers the front end by about 3" easiest way is to use xb tripples, and press in the tuber steering stem. I think you have to counter bore the bottom and top like a tuber tripple. |
