Author |
Message |
Joaofpinto55
| Posted on Monday, November 14, 2011 - 08:03 am: |
|
hey does anyone know if i can put a 2005 race ecu for a buell xb9r firebolt in a 2003 buell b9r firebolt |
Hogs
| Posted on Monday, November 14, 2011 - 08:16 am: |
|
Not sure ...But I think 2005 to 2007 were different from the 2003 and 2004 xb9`s... Maybe others will chime in to state! |
Terrys1980
| Posted on Monday, November 14, 2011 - 10:46 am: |
|
No you can't put the 05 ecm on an 03. If all you want is race maps, you can download the maps and burn them to your 03 ecm. |
Joaofpinto55
| Posted on Monday, November 14, 2011 - 04:15 pm: |
|
so i could by a stock ecm and put the race maps on it how do i go about doing tht cus i just found out now its definitetly my ecm that needs to be replaced i unplugged every wire on the wiring harness and was still blowing a fuse until i disconnected the left side of the ecm which is where its shattered and didnt blow a fuse after a i put the whole bike back together |
Terrys1980
| Posted on Monday, November 14, 2011 - 05:00 pm: |
|
You will need the ECMSpy program and cable. Also it would help for you to find the ECMSpy Tuning Guide V2.0. I attached the race maps.
|
|