Author |
Message |
Jrr
| Posted on Monday, July 05, 2004 - 10:33 pm: |
|
My front pads are dragging a bit. Is this an easy adjustment or should i take it to the service department. I just past the 500 mile break in and am looking forward to getting over 3500 rpm...but am a bit concerned about the scraping front brake. |
420at145mph
| Posted on Monday, July 05, 2004 - 11:30 pm: |
|
is it just when ur pushing it around? thats normal i think ive heard about it from alot of people here my front brake kinda drags when just pushing the bike too edited by 420at145mph on July 05, 2004 |
Jrr
| Posted on Monday, July 05, 2004 - 11:36 pm: |
|
I only notice it when i am pushing. The first 450 miles it did not drag, just started. |
420at145mph
| Posted on Monday, July 05, 2004 - 11:38 pm: |
|
its normal ive read it on this board alot mine does it too |
Darthane
| Posted on Tuesday, July 06, 2004 - 04:51 am: |
|
Donnie's correct - a small amount of drag is normal. It's usually just a light scraping sound noticable when pushing the bike around. If you can actually FEEL it binding, that would be a problem. |
Fullpower
| Posted on Wednesday, July 07, 2004 - 11:10 pm: |
|
there is no adjustment. if the brakes are dragging, then you have a stuck piston, and need to overhaul the caliper. |
|