| Author | Message | ||
     Tick |
so i was doing some dyno testing on some difference exhaust see with one i like. my bike(06xb12ss) had the jardine on it when i got it well i put the race can on with 04 brackets and had a problem with the front bracket .my question is there a difference between the brackets on difference years? my bike has on the left side a spacer with step in that is flush with the case o and on the right just a spacer that hangs out of the case about 1/2 in thanks. I dont know if this is o.e stuff need some info asap have more pipes to test and need to get the right stuff dont need to be messing up my cases | ||
| Nillaice |
need some info asap have more pipes to test and need to get the right stuff well I need some pics asap got more web to surf and bed time is near LOLz what is the problem you are having? | ||
| Rudy |
Is this what you're looking for?  That's a picture of the 2005 exhaust mounting setup. I'm not sure if it changed in 2006, sorry. I just know that I've got a race pipe on my '05 lightning and it uses the stock mounts. The bolt for the front mount (as seen in the picture) goes directly through the front / bottom hole in the engine case. Hope this helps. | ||
| Tick |
the deal is that the mount does not fit the gap is to small with the spacers that i have that were on the bike . thanks for the pic i have that in my book too i have 04 mount front with 06 bike not sure if they are the same and if the jardine has different spacing on the mounting point than stock again i got the bike with the jardine already on the bike | ||
| Doubled |
So you already have the factory mounts and you're having trouble getting them installed? Like Nillaice said, a picture is worth a thousand words. | ||
| M1combat |
He's got an '06 bike and '04 mounting hardware. Also... When he bought his bike it had a Jardine. The stock front mounting bracket is not used on the Jardine. So... Are the stock Aluminum bits that go between the bracket and engine the same on each side on a stock setup or are they different? He's asking because his are different and the bracket won't fit over them. Is it because the '06 mounting system is a bit different (narrower gap in the upper bracket) or because the Jardine front mount system replaced one of his aluminum bits? |
