| Author | Message | ||
     Agent216 |
i have a white 03 XB9R and wanna swap it to an XB9S....how hard is this swap? anyone do it on here...thanks for your time..mike | ||
| Terrys1980 |
Its been done dozens of times. I am sure you can find a write-up if you do a search for it. The rear end swap is pretty simple, front end not so simple due to the fairing bracket has to be changed and the headlight wiring is different. | ||
| Firebolt020283 |
to change the front you will have to change th wiring harness because the ECM is held in front fairing on the r and it is in the back of the bike on the s. | ||
| Terrys1980 |
to change the front you will have to change the wiring harness because the ECM is held in front fairing on the r and it is in the back of the bike on the s. Not necessarily true. If there is enough room to fit 2 HID ballasts and a Stebel air horn behind the XBS flyscreen, you can fit the ECM. | ||
| Wolfridgerider |
you would need to squeeze the ECM and 2 fuse blocks under that little fly screen... plus the horn... I think it would be a monster pain in the A But if you just put the S tail on the R... that looks bad A$$ if ya ask me...   | ||
| Brother_in_buells |
Here are maybe some parts for you!? http://www.badweatherbikers.com/buell/messages/21/ 613738.html?1296108608 | ||
| Glitch |
But if you just put the There fixed that for ya!   |
