| Author |
Message |
    
Road_thing
| | Posted on Monday, June 14, 2004 - 10:03 pm: | 
|
>>so im just gonna do everything i can my self n rely on the all knowing badwebb for the rest
Now you're gettin' the picture!
r-t |
Slowby
| | Posted on Tuesday, June 15, 2004 - 01:39 am: |
|
how much oil you putting in there?
if you dont want it to leak you could j b weld it
really you can make threads w/ the stuff. but were you complaining a bout a ride? for shame.
|
Court
| | Posted on Tuesday, June 15, 2004 - 04:42 am: |
|
Spray from the clutch?....
One of the funniest Buell stories ever when we were at Daytona in 1997.
Remind me to tell you someday.
It can happen...pressure and a blocked tranny vent make the housing of the clutch cable the path of least resistance.
HINT: Bad idea to be in the middle of your "they may have leaked oil years ago, but that's all history" talk just as your S-1 pukes a load of oil on your nice white shirt. |
420at145mph
| | Posted on Tuesday, June 15, 2004 - 01:01 pm: |
|
u can see were its coming from right there on the lever
the lever has ALOT of play in it not front n back but up and down
been like that since day one
even asked em about it the day i bought it
they said ah its fine
edited by 420at145mph on June 15, 2004 |
Reepicheep
| | Posted on Tuesday, June 15, 2004 - 01:41 pm: |
|
There is a tube that comes off the back of the top of the transmission, close to the starter. Trace it back and make sure it is not kinked / plugged (as Court suggests).
If it is not, are you spraying tranny fluid out the pipe in back as well? Could be a crank seal (not a big deal to fix). |
Tripper
| | Posted on Tuesday, June 15, 2004 - 05:17 pm: |
|
wimp
 |
420at145mph
| | Posted on Tuesday, June 15, 2004 - 05:29 pm: |
|
haha
ewww
no my back end dont look nothin like that
and if it DID
i think id take it to the dealer n leave it there |
Darthane
| | Posted on Tuesday, June 15, 2004 - 05:39 pm: |
|
Up and down play in the clutch lever is normal. Every bike I've sat on does that.
Tripper, is that from a blown rocker box gasket? |
420at145mph
| | Posted on Tuesday, June 15, 2004 - 05:40 pm: |
|
ya i know but this is probly an inch or so
ALOT more than ive ever seen anyway
well maby 3/4 of an inch
both my neighbors bikes have ZERO play in them
but then again there clutches are 10 times easier to pull
edited by 420at145mph on June 15, 2004 |
Tripper
| | Posted on Tuesday, June 15, 2004 - 09:07 pm: |
|
No, a simple cap blow off. You'd think they could figure out a screw on device. Oh, I guess they have, I'm just too cheap to buy it. |
