G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jraice Posted on Thursday, January 06, 2011 - 06:17 pm:        Manual seems to remove more than necessary to install reduction kit. What exactly is necessary? Manual had a special locking link tool. Not sure it's needed. Already got primary cover off. Thanks!   Sifo Posted on Thursday, January 06, 2011 - 06:52 pm:        You need something to lock things up while torquing the lock nut. It's a lot of torque! You might get by by putting the bike in gear and have someone press hard in the rear brake. I've heard this is doable, but haven't seen it first hand.   Yourguitarhero Posted on Friday, January 07, 2011 - 06:51 am:        4" brass door hinge   1324 Posted on Friday, January 07, 2011 - 08:55 am:        I made a tool to do this out of steel plate. PM me and I'll remember to measure it when I get home.   Jramsey Posted on Friday, January 07, 2011 - 01:07 pm:        1/4"x1-1/2"x4-3/8" aluminum bar stock,radius the ends to fit the tooth profile.   Vospertw Posted on Wednesday, January 12, 2011 - 05:50 pm:        I have parts on order but haven't done it yet so hoping you'll keep us posted! I plan on making a tool like Jramsey described.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: