G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jsg4dfan Posted on Tuesday, November 02, 2010 - 02:18 pm:        Does anyone know, or can someone with the right tool measure the angle off of vertical that the screws are on the timing cover? Specifically, the plate underneath the riveted cover. The rivets are horizontal, but the screws on the plate underneath the decorative cover are rotated slightly counter-clockwise from vertical. Any help would be greatly appreciated!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: