| Author | Message | ||
     Ochoa0042 |
I adjusted my clutch by the adjustment screw then by the cable.. afterwards the pull on the lever didnt want to go all the way and the throw on the lever was really short. im wondering WHY the lever stopped mid pull like there's some imaginary wall, Because it seems like everyting is working, there is no slipping when accelerating, there is no drag when at a stop in first-gear lever-pulled, but the throw in the lever is wacked! WHY>? | ||
| Obiewan |
Be careful, don't break the lip off the housing like I did. Don't force it, take another look at it all and make sure it's done by the book. check out what I had to do to fix it. http://www.badweatherbikers.com/buell/messages/384 2/282980.html | ||
| Obiewan |
Here is another thread, seems kind of common. http://www.badweatherbikers.com/buell/messages/142 838/483215.html?1249043054 | ||
| Ochoa0042 |
I got it! I forgot to loosen up the whole system, then readjust. man that could of ended up bad.  I have gone through the lip problem for my first primary cover because the previous owner sold it to me defective (Message edited by ochoa0042 on September 04, 2010) | ||
| Obiewan |
Your a lucky man! LOL.. have a drink, and vote them all out in November!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! uh oh! did I say that? LOL.. | ||
| Ochoa0042 |
what..? I'm not completely following | ||
| Obiewan |
Just joking around.. |
