G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Cataract2 Posted on Sunday, June 27, 2010 - 09:35 am:        Have this interesting problem with my XB9SX. When the bike gets hot to where the fan must run on shutoff and I go to restart it I noticed that it will idle low and then die. It also will tend to be hard to start. This goes on until the bike appears to go from open loop to closed loop. It runs fine during this when you're using the throttle. Just idle is off. Anyone have this happen before and what did it take to fix?   Cataract2 Posted on Sunday, June 27, 2010 - 11:02 pm:        Anyone?   Aptbldr Posted on Monday, June 28, 2010 - 07:16 am:        Intake Air Temperature sensor (IAT) heats-up as engine cools-down. Hot re-starts can have faulty fuel/air mixture; result of over-heated IAT's signal. Ride a bit and IAT cools.   Brumbear Posted on Monday, June 28, 2010 - 06:08 pm:        I would look there as well a little seafoam couldn't hurt through the machine as well

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: