Author |
Message |
Midnightrider10
| Posted on Tuesday, June 22, 2010 - 08:30 pm: |
|
Hey guys, When the ignition is on, the low beam is not lighting up but if I flip the brights on, the high beam does work...any ideas? |
Froggy
| Posted on Tuesday, June 22, 2010 - 08:46 pm: |
|
Ok, first things first, check the bulb, it might of burnt out or vibrated to death. If it looks good, try swapping it with the high beam bulb. |
Midnightrider10
| Posted on Tuesday, June 22, 2010 - 10:05 pm: |
|
checked bulb and it was blown, thx |
Mace32
| Posted on Sunday, June 27, 2010 - 06:03 pm: |
|
I had this happen to me a couple months ago. The pins inside the wire harness were not making a good connection. I pulled the harness apart and used a very small screwdriver to bend the pins so they would touch the metal on the female end. Worked immediately. I was upset that I spent 30 bones ordering a bulb from Harley and didn't even need it. |
Delta_one
| Posted on Sunday, June 27, 2010 - 09:48 pm: |
|
quote:I had this happen to me a couple months ago. The pins inside the wire harness were not making a good connection. I pulled the harness apart and used a very small screwdriver to bend the pins so they would touch the metal on the female end. Worked immediately. I was upset that I spent 30 bones ordering a bulb from Harley and didn't even need it.
did the exact same thing for my high beam only I bought 2 bulbs from autozone for about the same amount as I would have on a DDM HID kit I needed my lights working for homecoming and didn't have time to wait for shipping on HID's I'm going to see if I can still return them and order the DDM HID kit |
Brumbear
| Posted on Sunday, June 27, 2010 - 10:40 pm: |
|
get the man a drill and an ECM please |
|