G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Cataract2 Posted on Monday, May 24, 2010 - 11:10 pm:        05 XB9SX with the Race ECM, filter and Drummer Was riding today on my XB and noticed that around 2000 rpm in any gear if I hold a steady throttle and go to WOT that the bike will stumble just a bit and then get going. Was wondering if this is normal or not. Can't remember if it did this in the past or not.   Terrys1980 Posted on Tuesday, May 25, 2010 - 01:50 am:        The white wire mod might help you out. It can be disabled via ECMSpy or by pulling the wire out of the connector going to the ECM.   Cataract2 Posted on Tuesday, May 25, 2010 - 10:25 am:        Don't have it.   Terrys1980 Posted on Tuesday, May 25, 2010 - 11:33 am:        This should help White Wire Mod

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: