| Author | Message | ||
     Ljm |
I read the procedure for swapping the running light wire with the low beam wire on XBS models. Does this work with the r models? Thanks, LJM | ||
| Iman501 |
i was wondering about that to a while back, anybody know? | ||
| Glitch |
Stock configuration: With the bright lights on, the R has both lights on. With the bright lights on, the S swaps headlamps. | ||
| Livers |
Glitch, is the passing button still operational on the R's? Mine doesn't do squat and the FSM wiring diagram shows the handlebar controls as a black box. Or just a bad switch? | ||
| Gunut75 |
I asked the same question a year ago. I even posted how cool it was that someone had already done it to my R.   | ||
| Gunut75 |
Passing button flashes the high beam bulb. | ||
| Livers |
So I have a screwed up switch - Thanks. | ||
| 4cammer |
"Passing button flashes the high beam bulb." But not when the high beam is on, at least not on my '07 9R. Wish that it did... | ||
| Brother_in_buells |
Maybe you can use this also for the R series!? http://www.badweatherbikers.com/buell/messages/384 2/377314.html?1232150797 | ||
| Gunut75 |
This mod will have one light on for LOW, and BOTH lights on when running HI-BEAM. This is how R series come from the factory! It is also why I sounded like a geenius for a second a year ago. If you have an R, BOTH of your headlights are on when you turn on your brights. | ||
| Firebolt32 |
This is how R series come from the factory! It is also why I sounded like a geenius for a second a year ago. If you have an R, BOTH of your headlights are on when you turn on your brights. My 07' was like this as well. | ||
| Turboglock |
I did this but now im blowing a fuse? | ||
| Delta_one |
un-do it and see if the fuse still blows, if yes you have some other issue if no you crossed a wire somewhere the first time try again you are already back at the beginning anyway  | ||
| Turboglock |
yaaa your right i just recrossed them and its still doing it. So now i have a bigger problem so if anyone can help i could use it. its blowing the fuse that runs the low beams, speed and tac, break lights, and turn signals. So any ideas would be much help. |
