| Author | Message | ||
     Brumbear |
So the last couple times I went out after running her hard as I come to a stop once in awhile I get a sound like she's lost a plug or compression is dumping for a few seconds then all is well ? I can't find any problems nothing is loose and it runs great go figure? I'd like to figure it out before I find a problem the hard way any thoughts? | ||
| Froggy |
Are the plugs shot? When was the last time you changed them? Plug wires? I know your TPS is good, it was set correctly a few weeks ago. | ||
| Thatman |
Almost sounds like crank gas(hot vapor) escaping? Have you done the breather tube mod? Have you checked the breather tubes at the top of the heads, or is it a louder sound? | ||
| Ulynut |
Yeah, sounds like a breather to me too.  | ||
| Brumbear |
I think I am gonna go ahead and do the breather mod as I really can't find anything the wires plugs are good the tps is spot on and the bike really runs great I have no oil leaking I was however riding with Don for like 4 hrs I think I may have just pushed her a bit hard and she pushed back a bit we wil see thanks for the input | ||
| Thatman |
I get a sound like she's lost a plug or compression is dumping for a few seconds then all is well Sorry man; but as long as the plugs are tight and you don’t have any oil leaks from obvious places such as: crank sensor, head gaskets I would say yea, do your breather mod. Just keep an eye on it. Wait, I’m confused. Just looked at your profile and it say’s you have a lightning long, but shows you riding an 1125? | ||
| Brumbear |
inside pass at pocono when they debued the machine it was unforgetable at least I think there will be an 1125 in my future for sure | ||
| Marko138 |
I rode the 1125 at Inside Pass in Pocono too. What a good time. |
