G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jstfkndi Posted on Monday, August 03, 2009 - 01:10 pm:        I am doing bearing and seal replacement on the bottom end of an 06 XB12R. The question I have is if there any aftermarket bearings that would be better suited for the crank than the stock. While I have the motor this far down, the last thing I want is to put the same parts (meaing stock) back in if there are better options out there. The bike is stock and not performance modded in any way. Any information would be greatly appreciated! Thanks Buellers!   Xl_cheese Posted on Monday, August 03, 2009 - 02:14 pm:        I'm also interested in this being that I have my motor completely torn down.   Boltrider Posted on Monday, August 03, 2009 - 07:51 pm:        Look into what Slaughter says in this thread. The stock 2008 and up 12's have a bigger crank, bearings, and rods. Which means you would also need to machine the cases, so it could get pricey. http://www.badweatherbikers.com/buell/messages/327 77/484528.html?1249325796 (Message edited by boltrider on August 03, 2009)   Fahren Posted on Tuesday, August 04, 2009 - 09:44 am:        jstfkndi, you have a pm.   Jstfkndi Posted on Tuesday, August 04, 2009 - 01:59 pm:        Thanks Fahren!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: