Author |
Message |
Lake_bueller
| Posted on Sunday, March 07, 2004 - 02:49 pm: |
|
Check out this site. yoyodyneti Never heard of the guys but they has some nice XB bodywork. |
Gonen60
| Posted on Sunday, March 07, 2004 - 04:44 pm: |
|
prices are unreal..front carbon fender 95.00 dollars, might have to look into this further..
|
Johnnyxb9
| Posted on Sunday, March 07, 2004 - 06:07 pm: |
|
Full fairing for under $500???? If anyone has info on quality of these guys product I would like to know. |
Gonen60
| Posted on Sunday, March 07, 2004 - 07:35 pm: |
|
full fiberglass fairing under 250.00..where are these guys located ? |
Englishman119
| Posted on Sunday, March 07, 2004 - 08:50 pm: |
|
Yoyodyne is the body work on my race XB You can see the pics of it fitted at http://www.ramraceco.com I have the fiber-glass full bodywork (Upper and lower), front fender, carbon air-scoop with the re-postioned oil cooler now facing outeards. The carbon bodywork is identical, except it looks great without paint. If anyone is going to put it on a street bike, I can make a few suggestions that will make the fitting a little smoother. Mark.
|
Trojan
| Posted on Monday, March 08, 2004 - 06:41 am: |
|
All these part are made by Sebimoto in the Czech Republic, hence they can make them cheap (They only get paid thruppence every three years!). They are very good quality as well, although as they are 'Race weight' and very thin. If using one for road use you should think about strengthening the mounting points a bit more. One of our customers bought the fairing and made it into a road-going unit. I think it looks really good combined with the stock chin spoiler. |
Mookie
| Posted on Monday, March 08, 2004 - 10:01 am: |
|
what would your suggestion be for strengthening the mounting points be? |
Trojan
| Posted on Monday, March 08, 2004 - 11:30 am: |
|
I would put a couple more layers of glassfibre chopped strand matting in there. They do come with kevlar strengthening in these areas, but it is VERY thin. |
Gonen60
| Posted on Monday, March 08, 2004 - 01:15 pm: |
|
does the full body fairing come with mounting brackets and hardware? 220.00 you can't go wrong, plus it looks great with the stock chin spoiler |
Trojan
| Posted on Monday, March 08, 2004 - 03:07 pm: |
|
No, you have to supply brackets and all hardware to hold the fairing on and together.....Gaffa tape doesn't count |
Gonen60
| Posted on Monday, March 08, 2004 - 04:59 pm: |
|
would the buell bracket that holds on the stock fairing be useable? and if so, how many brackets would you need to Fab from there? |
|