Author |
Message |
Ceo79
| Posted on Thursday, July 09, 2009 - 12:01 am: |
|
Ok, I'm going to be cutting the damn thing up this weekend and I was wondering what to do with the wires that are used to light up the tag? Are you guys cutting them and capping them off so there's no short? I plan on notching the grater so light will hit the tag, so I won't need the wires. |
Sam_07
| Posted on Thursday, July 09, 2009 - 08:14 am: |
|
Just pull them out of the connector. Ive been running mine for a year and no problems, not even corrosion. |
Ferocity02
| Posted on Thursday, July 09, 2009 - 10:35 am: |
|
Cut and cap. I mounted the plate to the plastic under the tail pan and reused the stock light. Looks neat and factory-ish. http://www.greenravine.net/gallery/albums/userpics /DSC01678.JPG |
Ramm
| Posted on Thursday, July 09, 2009 - 10:43 am: |
|
nice bike ferocity. Do the cops hassle you about the tag location? |
Ceo79
| Posted on Thursday, July 09, 2009 - 04:40 pm: |
|
Cut and cap it is then. I'm with Ramm, I wanna know if you get harassed by the cops Ferocity? |
Ferocity02
| Posted on Thursday, July 09, 2009 - 09:14 pm: |
|
No I don't get hassled at all about the plate. From the back it's actually perfectly legible. I spaced the bottom of the plate away from the undertail so it could have a little more angle and be more readable from the back. |
|