G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mluds0379 Posted on Monday, June 22, 2009 - 05:55 pm:        What is the correct rpm idle speed? I have an xb9. It idles at around 700,800, Just yesterday it started stalling out a couple of times after running 20 seconds. The same thing happened today when I got out of work, started and ran for about 20 sec. then stalled.   Hammer71 Posted on Monday, June 22, 2009 - 06:17 pm:        reset TPS and set idle to 1050   Froggy Posted on Monday, June 22, 2009 - 06:36 pm:        1050, any higher and you may have issues with the idle "floating" when you pull the clutch in. Any lower and you may run into issues with stalling and not giving enough power for accessories. I run at 750, but I love the sound.   Miko_k Posted on Monday, June 22, 2009 - 09:12 pm:        I set my cold idle @ the minimum, that makes my tail light not flicker, which means it does provide enough voltage to charge the battery. It does happen to be around 1000RPM.   Brent_crossbronkos Posted on Tuesday, June 23, 2009 - 07:25 am:        Hammer71 is correct. This is the proper setting after a TPS reset and is where the bike will perform the best.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: