G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bueller83 Posted on Monday, June 15, 2009 - 03:12 pm:        Finish the plastics after cutting them. See i bought a crash cage and a 12 bar and plastic mods are needed just want to know what to do so it doesn't look so ruff around the edges   1_mike Posted on Monday, June 15, 2009 - 03:27 pm:        First shape whit what-ever you need to do the job. Then a mill (fine) file to finish shaping and a little smoothing. Then some 240 grit wet or dry. Then some 400, then 600, then 1000 grit. Then some plastic polish. I changed the shape of both my 1125 and XB front fender this way. All edges are nice and shinny. Even the black one. Mike   Bueller83 Posted on Monday, June 15, 2009 - 03:43 pm:        WOW that doen't seem too hard thanks

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: